All 4 Boat

Spare ring adaptor for air pumps/inflation pumps.

The sets consist of 6 adaptors suitable for different valve size.

Bravo 1 - foot air pump
Air capacity: 5 l
Dimensions: 26 x 20 x 8 cm
Pressure power: to 0,3 bar
For small synthetic and inflatable boats. Pump of thickened cloth and thickened hose. All metal parts are of Niro material. The delivery includes 2 air accelerator pump and an adaptor 566450.

Feet pump with steam-gauge.
Air capacity: 5 l
Dimensions: 26 x 20 x 8 cm
Pressure power: to 0,3 bar
For small synthetic and inflatable boats. Pump of thickened cloth and thickened hose. All metal parts are of Niro material. The delivery includes 2 air accelerator pump and an adaptor 801349.

Double-cycle air pump without manometer with ALU holder. Ideal for smaller inflatable boats. Supply with 2 air pipes and adapter 5666450.
Air capacity: max 150 l at 60 cycles
Dimensions: 22 x 11 x 45 cm

High-pressure two-chest feet pump.
Air capacity: max. 6,5 l
Dimensions: 32 x 23 x 7 cm
For inflatable boats even with high-pressure inflated bottom - 0,8 bar needed. The valve in the middle of the pump (yellow) helps to reach the pressure. When the valve closed you can reach the air capacity about 6,5 l and pressure to 0,3 bar. When the valve is open - about 1,5 l and to 0,8 bar. Supplied with 2 air accelerator pumps and adaptor 566450.

As additional equipment - adaptor for Halkey Roberts(HR) and Bravo 2001 valves.

Double lifting air pump with steam gauge to pump in inflatable boats and their inflatable keel accurately. Cover of resistant ABS material. The steam gauge allows to control the air-pressure accurately. Supply with 2 air accelerator pumps and adaptor 566450.
Air capacity: c. 300 l at lifting-up 60 times
Dimensions: 21 x 12 x 47 cm

Steam gauge to 0,5 bar of plastic material
Suitable for HR (Halkey Roberts). Valves for air pressure check of side chests (0,25 bar) and V-keels (0,40 bar). Ideal for all inflatable boats without stabile inflatable bottom, e.g.: Allroundmarin AS, Jolly and Ribstar models.

Steam-gauge to 1,0 bar of plastic material
Suitable for HR (Halkey Roberts). Valves to check stabile inflatable bottoms of Allroundmarin JOKER models and V-keels (stabile inflatable) at Allroundmarin Dynamic models.

Steam-gauge to 1,0 bar of plastic material. All with 6 adaptors for different standard valves.
2 possibilities of measuring:
A) in connection with foot and hand pump
B) for direct check

Adaptors of air pumps for Halkey Roberts (HR), Bravo 2001 or similar valves of inflatable boats. With locking mechanism and step hose sleeve. Suitable for hose to foot and hand air pumps. Do not use for e- air pump. Because of jags it stays in the valves without troubles.

Power: 800l/min.
Max. pressure: 0,19 bar (2,7 psi)
Power: 750W
When the handle is moved, the power of small valves can be decreased to 50%.

Ideal for:

• Swimming pools
• big regatta sea marks
• all air units with high capacity

Also suitable for deflation. (Inflatable boats must be pumped in with high-pressure hand or feet pump in accordance with the manual to produced to c. 0,30 bar). Pumps with higher capacity on demand.

Technical data and version as turbo compressor 801335 with integrated 12 V 7 Ah battery which can filled in 15 mins independently on some other source.
Boat included bottom: to 0,8 bar
Weight: 4,80kg
Supply content:

• portable bag
• hose
• adaptor 801349 with bar
• (HR) valves and cable for charger for cigarette lighter

Attention!: The adaptor No. 801344 cannot be used.

Výkon: 150 l/min.
Tlak lze nařídit plynule z 0,15 do 0,30 bar.
Spotřeba proudu: 9 A.
Kompresor vypne při dosažení nastaveného tlaku automaticky. Ideální k plnění a vypuštění nafukovacích člunů, koupacích člunů apod. 4metrový nafukovací člun je naplněn asi za 8 minut.
Rozměry: 235 x 130 x 130 mm
Váha: 1,1 kg
Dodávka kompletně s:

• přípojným kabelem
• žabkovými svorkami
• jednou sadou kruhových adaptérů pro nejrůznější ventily
  

Power: do 1000 l/min.
Regulable pressure form 0,175 to 0,25 bar.
The pump is switched off automatically when the demanded pressure is reached. C. 7 long inflatable boat can be inflated in 7 - 8 mins. Also deflation like at all the other el. pumps. Ideal pump even for higher capacity.
Weight: 3,5 kg
Supply content:

• portable bag with belt
• 3 m cable with special clamps
• 3 m hose
• 2 spiky nozzles
• adaptor set 801349

This pump version can be integrated permanently e.g. to rudder rack of big inflatable boats. Technology and power is the same as by Turbo Max č. 801336 model.