Charger
Classified according to: initial | alphabet | price
Display: all | only sale | only news
230 Volt of 12 Volt!
These invertors make sinusoidal similar alternating tension 220/230 V of one 12 Volt battery so many appliances for 220/230 V (TV-sets, computers, shaving machine etc.) can run.
Our invertors have these functions:
- automatic switch off when there is a low battery
- alarm when the battery is low
- protection against overloading and sort circuit and high initial current (starting) for inductive load
With the cooling ventilation form KV - 300. 24 Volt appliance by request.
MK110P and MK105P - CE tested for 12 V battery from 50 - 130 Ah.
Current: 5 event.. 10 A especially for lead accumulator with acid and AGM (Vlies) battery
- compact charging with unbreakable case of plastic material
- with ventilation bores on all the sides
- with comfortable grip
- suitable for interior
- unsuitable for moisture
Weight: 2,7 kg
to charge for 12 V of lead accumulator.
Current: 5 A (MK105P) event. 10 A (MK110P )
With protection against shunt fault and reversing of polarity and IUoU charging (MK110P ), MK105P 2 step charging.
Connection: for 230 V
alternating current: 50 Hz
Cable length: 1,8 m
- with solidly assembled feeder cable 1,8 m
- 2 pole
- clamps included
Jsou vybaveny dvěma nebo třemi výstupy. Zvláštnost spočívá v tom, že každý výstup může mít své vlastní parametry. Proto se mohou i baterie zapnuté např. na 24 V nebo 36 V v sérii bez přerušení sériového zapojení nabíjet. Vhodné pro fixní montáž na člunu nebo v karavanu s automatickým 3 stupňovým nabíjením (omezení proudu, napětí a udržovací nabíjení).
Vlastnosti: odolné proti vodě, nárazům, vibracím i korozi
Použití: v mořském vzduchu
Jsou též zabezpečeny proti jiskření, zkratu a přepólování.
Charging with 2 outputs in the most modern techniques of the microprocessor control.
Battery capacity: 60 - 160 Ah
- for parallel and charging operation
- for gel battery or with the liquid electrolyte
- time and current checked according to IuoU
Charging with 2 outputs in the most modern techniques of the microprocessor control.
Battery capacity: 100 - 300 Ah
- for parallel and charging operation
- for gel battery or with the liquid electrolyte
- time and current checked according to IuoU
Charging with 1 output in the most modern techniques of the microprocessor control.
Battery capacity: 100 - 300 Ah
- for parallel and charging operation
- for gel battery or with the liquid electrolyte
- time and current checked according to IuoU
Charging with 1 output in the most modern techniques of the microprocessor control.
Battery capacity: 60 - 316 Ah
- for parallel and charging operation
- for gel battery or with the liquid electrolyte
- time and current checked according to IuoU
The power of the most modern appliances is much better than by the common standards in the market. Their high technical parameters allow quick and easy battery charging.
Advantages:
- charging with 3 stages (IuoU)
- multiple output to charge more battery groups (internal divider)
- select switch, battery load
- liquid gel-electrolyte
- even as mains supply without batteries
- low residual oscillating at the output (lower than 30 mV RMS)
- compatible with every generator type
- protection against shunt fault, overloading and overheating
- operation in the scale of wide temperature range
All the appliances with IUoU.
Models 800, 1200 and 2850 are equipped with 2 outputs, model 2500 has 3 outputs.
So you can charge between 1 and 3 batteries in the same time when you wish. Even the gel batteries/AGM or lead/acid batteries can be charged in one moment because of one inside divider. Switching can be set up because of the switch.
Electronic-controlled machines with techniques of combined circuit so they are light enough (without heavy 50Hz -transformer) and certainly they are CE-tested. High efficiency with low energy consumption at 230 V. Integrated protection against reversal of polarity, short circuit, overloading.
Electronic-controlled fully-automatized charger especially for use in the navy voyage. All the electronic parts are specially varnished as protection against corrosion so they are high-moisture and aggressive sea-air-resistant. The high level of effectiveness and low energy consumption is typical for the charger.
Voltage: 230V, 50-60 Hz
Even the empty batteries can be charged.
Protection against:
- reversal of polarity
- short circuit
- overcharge and overloading
Assembly on:
- wall with a carrier rail (35 mm)
- straight surface with anti-vibration rubber flanges (included the supply)
Suitable for either lead batteries or gel ones or with acid.






















