All 4 Boat

MK110P and MK105P - CE tested for 12 V battery from 50 - 130 Ah.
Current: 5 event.. 10 A especially for lead accumulator with acid and AGM (Vlies) battery

• compact charging with unbreakable case of plastic material
• with ventilation bores on all the sides
• with comfortable grip
• suitable for interior
• unsuitable for moisture

Weight: 2,7 kg
to charge for 12 V of lead accumulator.
Current: 5 A (MK105P) event. 10 A (MK110P )
With protection against shunt fault and reversing of polarity and IUoU charging (MK110P ), MK105P 2 step charging.
Connection: for 230 V
alternating current: 50 Hz
Cable length: 1,8 m

• with solidly assembled feeder cable 1,8 m
• 2 pole
• clamps included

Function of 4 LED indicator:

green I:The appliance is connected to 230 V
red: battery is not connected or any other failure
yellow: charging in the right charging position. It is being charged for 14,4 V and it can reach up to 75 % in this position then it is changed for 13,5 V to reach about 90% automatically.
green II: full-charging up to about 90%, maintenance phase, tension between 13,2 and 13,5 V

Minn Kota multi-stage professional appliance check the initial tension and accumulator current automatically to charge your battery quicklier and place it safely when being charged.

• the charging stage which is limited, supplies the tension unless the battery reaches 75 % to its capacity(14,4 V)
• The tension decreases to 13,5 V in this limited stage to keep the state on the low level meanwhile the battery absorbs the current in its own decreasing rhythm.
• the permanent or variable stage decreases the output accumulator tension and when the battery is charged fully, it keeps the tension between 13,2 V and 13,5 V and the current between 0,1 and 0,3 A with the respect of the short or long time when the battery is stored