All 4 Boat

CEEform plugs
Tension: 230 V
Current: 16 A
3pole (2pole + earth connection)

CEEform plugs
Tension: 230 V
Current: 16 A
3pole (2pole + earth connection)

The locking lid protects against unintentional pulling out.

To find out 230 V appliance on the boat or caravan. 2pole circuit breaker saves at against overloading, short circuit and injury with the el. current when touched. There disconnection of the net at the wrong current (30 mA event. at loading - 16 A). Screwing connection to the protective connect and tension balance. Haul unloading for input ant output cable is integrated in the appliance.

Tested: TÜV-GS
Plastic cover: black, fire-proof
Dimensions: length 135 x width 125 x height 80mm/500g

CEEform plugs
Tension: 230 V
Current: 16 A
3pole (2pole + earth connection)

CEE portable plug and connecting plug.

To fasten down the boat in the port or winter camp-site if there is connection to alternating voltage.
2pole circuit breaker protects it against overloading, short circuit and injury with the electricity when touched. There disconnection of the net at the wrong current (30 mA event. at loading - 16 A). Screwing connection to the protective connect and tension balance. Haul unloading for input ant output cable is integrated in the appliance.

Tested: TÜV-GS
Front board: aluminium, dead black, anodized
Dimensions: length 141 x width 131 x height 75mm/600g

It protects 230 V appliances against overloading e.g. when operated with generators and other tension sources. It is installed according to the input interlock switch (LS or LS/If) and according to appliances. Witch green pilot-light to start the operation and a testing button to check it. The automatic disconnection when overloaded and then connected again after 6 s.
Connecting cable: 1 m

Switch control board to fasten down the boats in the port are winter camp-site to connect to 230 V alternating tension. 2pole circuit breaker protects it against overloading, short circuit and injury with the electricity when touched.
There disconnection of the net at the wrong current (30 mA event. at loading - 16 A). With lighting and divided output for 230 V boiler.

Plug with the lid: 230 V, line pilot-control
Front board: aluminium, titanium brown, anodized
Dimensions: width 118 x height 250 x depth 110 mm
Weight: 0,6 kg

For 2 batteries.
Permanent load: 350 A at 12 V
For a short-term: 800 A
Material: PC with microswtich and self-lighting description
Dimensions: 125 x 125 x 84 mm

Suitable for 230 A permanent load and to 300 A for the short time.
Dimensions: 13,4 cm
Height: 7 cm
Switch possibilities: switch off, battery 1, battery 2, both batteries

Suitable for 230 A permanent load and to 300 A for the short time.
Dimensions: 13,4 cm
Height: 7 cm
Switch possibilities: switch off, battery 1, battery 2, both batteries
2 keys in the delivery.

Suitable to 250 A of permanent load and to 350 A for short time.
Possibility to switch it on: switch on/off, with red key.

Suitable to 100 A of permanent and to 500 A of short time. With red keys.

With balancing screw. Made according to EN28846. Suitable to 140 A of permanent load and to 2000 A for short time (3-5 sec.).

2pole for current dividing Plus and Minus poles and as a protraction against corrosion. Made according to EN28846. Suitable to 120 A of permanent load and to 2000 A for short time (3-5 sec.).