All 4 Boat

It goes back automatically to zero-position when switched off. This function mainly protects the balancing clacks against damage during transport. We always know the position of the balancing clacks at the start.

Short cylinder:
lifting up 61 mm, length 256 - 320 mm
Standard cylinder:
lifting up 94 mm, length 290 - 384 mm

More information about balancing plates

More information about MINN KOTA balancing shutters

MINN KOTA balancing plates are unique at the market because of many good features. When the plates are installed the movement of the boat axis under your control, also the heeling to the side and around cross-axis/transverse axis (stem rising) so you can improve the voyage of the boat because when the accelerator is pressed for 50% the boat rises steeply up to the height and pushes lots of water in the front.

more about balancing shutters

Suitable for all Benett balancing systems - 12 and 24 V. Suitable for all standard appliances with mounting opening of 57,2 mm diameter. It can be adjusted to any installation so the control system. Accurate LED indicators. Sensor and memory of the accurate time. Accurate and precise. Water-proof cover, during night navigation it can be switched to low light, sharp light for day-time.
Small dimensions: only 63,5 x 85,7 x 18 mm. Bennett is in good design which is compatible and it can be installed very easily.

Needle indicator to built-in to instrument board.
Diameter: 54 mm with the sensor.
Round version.

Board of Nirosta material with 1-2 cylinders for the board according to its size. The delivery contains y hydraulic pump (12 V if there is not any other information).
Content:

• hose
• swivelling double switcher
• connecting cable

Especially for small boats with low spiegel of the stern.
Height of assembly: only 23 cm with short balancing cylinders but with the same power as by the standard balancing clacks.
Part of the delivery:

• hydraulic pumps
• hose
• swivelling double switcher
• connecting cable

Yu can buy it as an additional set for common Bennett balancing clacks and also as an individual system.
Lift of hydraulic cylinder: 45 cm.
length 30 or 60 cm on request.

They are the strongest and most massive in Bennett series.
For speed to 100 km/h, of Niro material with black cover of PVC.
Part of the delivery:

• hydraulic pump 12 V
• hose
• swivelling double switch
• connecting cable

Fully automatic control of balancing clacks which checks and analyses change of the boat position 650x per a second and records it in the average value so the characteristics of the boat is recorded. It is used to set up the function of the balancing clacks. Integrated acceleration/delay limits the early correction because of short-lasting weight displacement or because of waves.
In the delivery:

• controlling element
• position sensor
• CPU microprocessor
• ATC-module

Also all cable connection.

With integrated position indicator of the balancing clacks. The assembly is very easy and the standard switcher is inserted easily.