All 4 Boat

Model P14: for both side fixation on the pipe which is from 1120 - 1470 mm wide
Model P15: pro both side fixation on the pipe which is 1470 - 1820 mm wide
Model P22: for fixation to the boat bottom and on the pipe

To assemble on the boat e.g.: in the inflatable boats with the solid floor and for Aussenborder to max. 85 PS. Grip of stainless steel with fixation plate of anodized aluminium.
The delivery does not include:

• suitable gear-box T67 for P26 model
• rudder for choice
• suitable control cable - M58 version
• various cable accessories
• fixation plate for control box

Steering box with mechanical transmission. To use with out-board motor to 40 kW (55 PS). Suitable control cable M58. Suitable motor connection. Rudder to choose.

T85 corresponds to safety standards ABYC. To use with external and internal motor and even power to 173 kW (235 PS).

Features and technical data:

• ideal controlling system there where the mounting place is limited
• turn the steering wheel about 3-times sharply from the left to the right
• lifting length 228 mm
• max. diameter of the rudder 406 mm
• max. power with the influence on control lever: 3300 N (340 kg)
• minimal back stroke
• suitable control cable M66 T85 simple cable
• steering box

T71 and T72 correspond to safety standards ABYC and they are suitable for external and internal motors and Z power. T71 to c. 173 kW (235 PS) simple cable. This control cannot be used for motor-boats which motor is with higher PS than it is permitted for the boat. A double cable-steering box should be used for the boats faster than 50 miles/hour.

Good bargain, similar as hydraulic systems. Because of patent hold-down system by Uflex the pressure power is taken from the rudder which is created in the normal way via "Holeeffekt" screw propeller so you do not need to check the device all the time.

• compatible design
• positive rudder control
• anti-explosion volt
• adapting piece/tee is a part of delivery

The hydraulic pump UP20 F is suitable for the hydraulic cylinder:

• UC 94-OBF/1 - catalogue number 568470
• UC 94-OBF/3 - catalogue number 568471
• UC 68-OBS - catalogue number 568485
• UC 69-I - catalogue number 568440
• control cylinder

features:

• assembly behind armature carrier
• suitable for motors to 300 PS
• compatible integrated dimensions
• positive rudder shifting
• anti-explosion volt
• adopting piece/tee is part of the delivery
• optional filling adaptor KIT-F 56 8483 necessary for control pumps rear mount

Control pumps with setting mechanism, rudder adjustable 48 grades up.
Features:

• adjustable to the height in 5 levels
• compatible design
• positive rudder control
• anti-explosion volt
• adopting piece/tee is a part of delivery
• optional filling adaptor KIT-F 56 8483 necessary for control pump rear mount
• UP 20 T suitable up to 150 PS

• simple assembly via swivelling axle of out-board motor
• assembly in the middle
• vessel displacement and rudder rotation left/right
• for sale in two sizes

Features:

• side assembly via swivelling axle of out-board motor
• no movement of hydraulic hose
• for sale in 2 sizes
• UC 68-OBS 56 8485 to 150 PS in connection with UP 20
• UC 132-OBS 56 8454 to 300 PS

Features:

• simple assembly in the middle of the motor
• vessel displacement and rudder rotation left/right
• hydraulic cylinder is not movable
• fixed solidly
• no movement of hydraulic hose when controlled
• hydraulic hose can be led to the boat in the shortest way
• very little place occupied

X12 - protection against self-start protects the motor to go when there is no gear.

The optimal balance is important especially for small boats because of this appliance the weight (load) can be nearer the stem and even in this situation the motor can be controlled easily. Suitable for all out-board motors with manual control sold at the market.