Motors and accessories > Accessories
Classified according to: initial | alphabet | price
Display: all | only sale | only news
Of Nirosta steel, set with a brass lock.
Length: 320 mm
Pipe diameter: 30 mm
Classic shape of ELTEX plastic material - 22 l.
CE tested
- side check stripe
- reserve for 2 l more
- vertical usage
CE tested.
Side check stripe of ELTEX plastic material, horizontal usage.
Of ELTEX plastic material according to valid standards.
The cover is extra strong and shock-free. The locking piece is equipped with the pressure relief valve. The Connection and the indicator (accurate) are separated.
Reserve: 1 l
Capacity in total: 22 l
Dimension: height 50 x width 32 x depth 21 cm
Good bargain and practical piece. Of plastic material with screwing mouth. It should not be missing in neither boat nor caravan.
For nautics, constructions, air transport, car racing, lawn mower etc.
It filters water and dirtiness of the petrol, oil and kerosene and it protects the motor not to be damaged.
Inox reticle with holes 0.0029 mm does not let the water go inside. Quick flow. The filter cannot be disassembled because of the guarantee of 100% functionality. When used carefully the useful time is up to 10 years.
The funnel of plastic material with strainer, sharp edge and mouth.
Funnel diameter: 230 mm
The best and most effective way to tank liquid of all kinds without high energy. Neither funnel nor lifting up or pouring/holding the can is not needed.
Pump all the liquid as e.g.
- petrol
- kerosene
- detergents
- oil or water
- salty water
- diluents
- alcohol, etc.
Sink the hose with the pump to the liquid about 20 cm and move with the hose up and down so the liquid is in the demanded amount. The liquids flows itself.
The hose can be prolonged and changed.
Essential for service for water-cooled motors.
Standard version: hose connection 3/4" internal thread, water connection on one side
Filtration cuff "Professional": hose connection 3/4" with internal thread, water inflow on both of the sides






















