All 4 Boat

This carrier is made of firm zinc-coated steel pipe with thick and wide wooden plate for motor to 80 kg.

Carrier form zinc-coated steel pipe. Mounting plate of clingstone, height of carrier about 90 cm. The carrier can be swung and so it is easy portable. Good for exhibitions, workrooms, winter warehouses. Suitable for motor to max. 50 kg.

Device to fix a tank included. Of zinc-coated steel pipe, swing-up, suitable for motor to 50 kg. Wooden plate 43 cm.

Suitable motors to 20 PS. Varnished wood is salt-water-resistant. Side board of solid Nirosta material.
Straight version: adjustable to 3 positions with the inclination 0 to 17 gr..
Oblique version: adjustable to 3 positions with the angle 22 to 35 gr.

Suitable for motors to max. 8 PS. The platform is fixed between both of Niro-angles.

For motors to max. 5 PS. Ideal for platforms of glass-fibre. Side edge of Nirosta material.

Features:

• wooden board 20 x 25 cm
• varnish is salt-water-resistant
• all with adjustable shoulder

Extra-strong folding motor carrier for motors to max. about 25 PS and with the weight max. 60 kg.

Swivelling system of anodized. aluminium. Wood with varnish resistant against salty water, for motors to max. 15 PS, resp. 40 kg. The strong spring allows to lift up and sail the boat without problems.

Swivelling system of anodized. aluminium. Wood with varnish resistant against salty water, for motors to max. 15 PS, resp. 40 kg. The strong spring allows to lift up and sail the boat without problems. Motor board of plastic material.

For both of the carriers 563273 and 563274 to assemble on the oblique wall. Adjustable size in 5 levels - between 5 and 30 grades.

For the motor carriers 563273 and 563274 of anodized. Aluminium. This board allows to assemble it quickly resp. to remove the carrier when needed. .

Of aluminium. Board of thermoplastic material.
Size: 26 x 15 cm
Maximum load: 40 kg
Weight: 2,5kg.

RG 35 Multi - Nopp mat of polyester sponge material.
Absorption degree: according to DIN 52215
Average value: about 78%
Dimensions: 100 x 100 x 6 cm
Weight: 1,3 kg
RD 35 is thermoplastic and it can be used easily in all the positions and in every space. Fixation either with the glue or with screws. MULTI - Noppu surface can adjust to the motor space because of fire-resistant paint.

RG 35 Multi - Nopp:

• resistant against self-burning
• with self-extinguishing feature for all the material - not only on the surface
• certificated according to ISO4589-3

For Minn Kota out-board motors.
Lifting up, folding mechanism of NIROSTA. Specially for Minn Kota enlarged mounting platform of varnish salt-water resistant material.
For out-board electro motors to 6 PS.