All 4 Boat

Ideal for mobile use of fish finder. Standard stern sensor can be used instead of sucking disc via clamp on sensor rod - clamp is included the equipment.

Adjustable angle of inclination. With rubber base and ring.
Circle diameter: c. 50 mm

For all common Downrigger types. Mounting base can be adjusted in the horizontal level.
Width of screw clamp: do 6,35 cm

Angle of inclination can be changed with detent screw.
Pipe holder: c. 50 mm

Short pipe holder, special for net or yard, turn around 360°.

Fixing plate as spare one or to assemble Tite Lok products in other places on the boat via fixing plate.

Massive of fibre glass and nylon. Broad usage! Swivelling fixation for about 360° can be mounted either on vertical or horizontal surface. The manipulation can be done by a hand because the adjusting screw reacts to spring pressure. If the rod is slide in via the coil risen up it can be fixed solidly in the holder with the rotary safety mechanism.

• compact Downrigger especially suitable for smaller boats
• pulling speed 75 m/min.
• Heavy-Duty arm/console - 60 cm for weight to 9 kg
• check of positive ions
• NIRO-316 cable - length 60 m
• fracture plummet68 kg
• stop system: pulling is stopped automatically when plummets on water level
• step counter - meters

• kompaktní elektromotor
• stop systém: vytažení se zastaví automaticky, dosáhne-li závaží vodní hladiny
• kontrola pozitivních iontů
• silné teleskopické rameno (60-135 cm)
• včetně 3stupňového počítadla hloubky, držáku prutu
• palubní montážní desky s rychlouzávěrem
• 60 m AISI 316 Niro-lano (lomové zatížení 68 kg)
• háček na závaží Downriggeru
• otočná základna se 6 pozicemi a Universal Line Release

• for sport fishermen
• s Humminbird - fish finder - series 700, 900 or 1100
• to 6 MAG 20 DT/HS Downrigger, controlled in parallel directly with your finder
• positive ion check (also controlled via Humminbird fish finder)
• turn-included turn around plate, two rod holders, 120 m NIRO- wire rope, (fracture plummet68 kg) and Universal Line Release

• white varnish with NIRO arm and NIRO coil

• The smallest one from Cannon Downrigger series
• about 6 cm
• horizontal spool with handle and ribbed bolt nut as a brake
• arm and holder from lexan and stabile version in one piece
• included 30 m of AISI 316 Niro steel rope (fracture plummet54 kg)
• sheave with counting roll (at the bottom)

• stabile construction from lexan and stainless steel for sea/salt water
• brake-clutch system (for simple hand drive
• 46 cm long Co-polymer arm, arm pulley with depth device (at the bottom), board mounting plate with quick-closing device and rod holder
• 30 m AISI 316 Niro steel rope included (fracture plummet68 kg) and Universal Line Release

• changed version for much faster plummet pulling up
• depth device in meters
• excellent price and performance parameters
• from massive lexan for maximal long-lasting service in salty water
• compact sizes: portable or stabile appliances
• clutch-brake system for simple hand drive
• 60 cm long Co-polymer arm, arm pulley, board mounting plate with quick-closing device and rod holder
• 45 m AISI 316 Niro steel rope included (fracture plummet68 kg) and Universal Line Release

• hand high-efficiency Downigger
• 50% quicker to pull up the load
• compact construction salty-water resistant
• clutch-brake system for simple hand drive
• slow checked plummet launch which protects the pulley not to jump out or tie a knot
• launch the plummet quickly with one hand and check the fishing rod with the second hand
• included 6-stage turn-around mounting plate
• included hooklet for load, rod holder and 60 m AISI 316 Niro steel rope (fracture plummet68 kg) and Universal Line Release